Hi, I'm trying to use the AC97 modem on my laptop.
With kernel 2.6.13.2 and alsa (slmodemd) daemon I recognize my modem.
minicom and vwdial seems to work with that modem.
The only problem I get is the I got every time the NO CARRIER issue.
Naturally, the same phone line with the same modem is working under Windows XP :-)
below is the output of slmodemd and the vwdial daemon.
Any help would be appreciated
HERE THE ALSA MODEM RECOGNITION AND DIALING
[root@narciso ~]# ./slmodem-2.9.10/modem/slmodemd --alsa --country=ITALY --debug=10 hw:1 > modemalsa.txt
<391.920776> SmartLink Soft Modem: version 2.9.10 Sep 23 2005 16:55:17
<391.921484> hw:1: startup modem...
<391.922523> hw:1: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:1' created. TTY is `/dev/pts/1'
<391.925433> open file: /var/lib/slmodem/data.hw:1...
<391.927153> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
<410.289340> main: alsa_device_write (32): 32...
<410.488347> main: alsa_device_read (2048): 140 ...
<410.500599> main: alsa_device_write (140): 140...
<410.501221> main: alsa_device_read (2048): 124 ...
<410.502013> main: alsa_device_write (124): 124...
<410.503654> main: alsa_device_read (2048): 24 ...
<410.504330> main: alsa_device_write (24): 24...
<411.016248> main: alsa_device_read (2048): 120 ...
<411.028470> main: alsa_device_write (120): 120...
<411.029083> main: alsa_device_read (2048): 124 ...
<411.029915> main: alsa_device_write (124): 124...
<411.040940> main: alsa_device_read (2048): 112 ...
<411.053300> main: alsa_device_write (112): 112...
<411.053914> main: alsa_device_read (2048): 124 ...
<411.054715> main: alsa_device_write (124): 124...
<411.176216> main: alsa_device_read (2048): 120 ...
<411.188550> main: alsa_device_write (120): 120...
<411.189192> main: alsa_device_read (2048): 124 ...
<411.189981> main: alsa_device_write (124): 124...
<411.200980> main: alsa_device_read (2048): 112 ...
<411.213258> main: alsa_device_write (112): 112...
<411.213885> main: alsa_device_read (2048): 124 ...
<411.214684> main: alsa_device_write (124): 124...
<411.313672> CALLPROG: Time out
<411.314259> STATE: CALLPROG_WAIT_DIAL --> CALLPROG_END
<411.314908> call: process: msg 0 --> 2
<411.315489> hw:1: modem_update_status: 16
<411.316078> hw:1: --> FINISH.
<411.316643> hw:1: modem_hup...
<411.317239> hw:1: modem set state: 2 --> 9...
<411.317833> hw:1: new state: DP_DISC
<411.318406> hw:1: modem_stop..
<411.318975> main: alsa_stop...
<411.319609> hw:1: modem set hook: 1 --> 0...
<411.320207> main: alsa_ioctl: cmd 2, arg 0...
<411.320816> main: alsa_ioctl: cmd 8, arg 0...
<411.321423> call: delete...
<411.321987> Dialer was aborted.
<411.322553> CALLPROG_Delete is entered
<411.323144> cadence_delete with CADENCE_DIAL_OBJ is invoked
<411.323758> cadence_delete with CADENCE_OBJ is invoked
<411.324375> CALLPROG_Delete is exited
<411.324954> hw:1: modem set state: 9 --> 1...
<411.325560> hw:1: new state: MODEM_IDLE
<411.326146> hw:1: modem report result: 6 (NO DIALTONE)
<411.326772> main: dev write = 0
<411.425311> main: termios changed.
<411.425912> hw:1: update termios...
<411.426505> main: pty closed.
net dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT7027020000
--> Waiting for carrier.
ATDT7027020000
NO DIALTONE
--> No dial tone.
--> Disconnecting at Wed Sep 28 12:29:43 2005
HERE THE VWDIAL OUTPUT:
[root@narciso ~]# wvdial --config caz.conf
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT7027020000
--> Waiting for carrier.
ATDT7027020000
NO DIALTONE
--> No dial tone.
--> Disconnecting at Wed Sep 28 12:30:11 2005
Hey, it would be a good idea to post on this over at the other forums at:
http://www.x1000forums.com