X1000 Forums

x1000/zt3000/nx7000 - General => General => Topic started by: bili_39 on April 11, 2009, 11:57:02 AM

Title: Windows 7 on nx7010 (x1000)
Post by: bili_39 on April 11, 2009, 11:57:02 AM
Hi to all!

Few months without a new post... There isn't much of traffic about these machines anymore.
For anybody to know: I have put Windows 7 (7077) on my nx7010 and it actually runs quite good. An usual problem with graphic driver (similar to Vistas), otherwise no problem.
Returning from hibernation is now very quick. In Vista sometimes takes forewer.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: GotNoRice on April 23, 2009, 04:19:13 PM
Quote from: bili_39 on April 11, 2009, 11:57:02 AMI have put Windows 7 (7077) on my nx7010 and it actually runs quite good. An usual problem with graphic driver (similar to Vistas), otherwise no problem.

Which driver did you install in windows 7?

I have an issue where it won't work, even in XP, with any driver newer than Catalyst 5.6 (June 2005).  I was able to force the XP 5.6 drivers (since vista didn't even exist back then) to install in Vista but even though it worked ok on the desktop I couldn't launch any games, etc.  I eventually reverted back to XP.

Did you use a similar method to get it working in windows 7 or are you just using an external monitor?
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on April 27, 2009, 12:45:24 PM
As in Vista, you can choose between Omega 5.6 or similar package. I use SP31674 - drivers for nc4000. Don't really know if they are older, but they work fine. I used manual update and point the folder... Oh, and uncheck only compatible hardware - as I pick mobility radeon 9000.

I am not interested in games. Last thing I played on this machine was one NFS, but don't remember which one...
Title: Re: Windows 7 on nx7010 (x1000)
Post by: sdn111 on May 07, 2009, 12:26:15 PM
bill,

Did you do a fresh install?  I was previously running vista and did an "upgrade" now that the RC is out.  It started the install process and was unpacking files then my pc restarted, returned to vista and gave me a popup that my pc was not compatible, not detailed explanation.  Did you experience this at all?  I may try a clean in stall.  thanks in advance. 
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on May 21, 2009, 02:45:27 PM
Sorry for late reply..

Yes, I did a fresh install in separate partition. As a matter of fact, I replaced my Vista installation and keep XP, which I use for compatibility reasons.

And no, no compatibility warnings. Just like installing Vista.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: clarity on June 27, 2009, 06:25:16 AM
Hi,

I've managed to install the driver ok, and the internal laptop display works ok, but the external LCD is stuck at 1280x1024. Anyone else with the same problem and hopefully a fix?
I also cannot switch just to the external display, fn+f4 doesnt work, and if I try to do in display settings it says Cannot save settings (only if I set external LCD to be the main display)
Title: Re: Windows 7 on nx7010 (x1000)
Post by: toy4two on August 08, 2009, 11:11:31 AM
I haven't used my X1000 in almost a year, but its such a wonderful piece of hardware, I am going to format it and install Windows 7 RC on it today, I'll keep you guys updated.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: toy4two on August 08, 2009, 08:27:36 PM
Just finished installing Windows 7 RC on the X1000 its running great.  I am using a 1.7Ghz CPU and 1 Gig of ram.  I had the problem with the video card like above, just manually install the built in ATI Radeon Mobility 9000 works great at 1280x800 32bit.  Also when you first install Windows 7 and plug it into your network it will do an update, after that update, go into the Device Manager and do a Scan for Hardware changes, it will automatically install all the missing drivers with on exception:

Intel(R) 82801DBM LPC Interface Controller - 24CC

Has anyone been able to find a Vista driver that will work for the above.  On Intel's web site the only chipset drivers I could find are for Windows XP lol.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: broken-elevator on August 13, 2009, 03:09:52 AM
hi bill

thanx for you post. does aero work in windows 7 that you installed on nx7010 (mobilty radeon 9200)???
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on September 07, 2009, 03:45:52 PM
Quote from: broken-elevator on August 13, 2009, 03:09:52 AM
hi bill

thanx for you post. does aero work in windows 7 that you installed on nx7010 (mobilty radeon 9200)???

Heh. No way. You need radeon 9600  or better.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: hydroponik on September 26, 2009, 03:36:22 PM
I was planning on installing W7 as well, but are you saying there aren't any display drivers that will work?  I have the 16x10 screen, and if were stuck at a lower resolution, it would totally kill any desire to run W7.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: Mr Cin on October 23, 2009, 04:47:19 PM
Hi All,

Can't help tinkering with my NX7000 - 6 years now is it?  Blimey!

Anyway, the easiest way to get native resolution in W7 is as follows:

1. Install W7;
2. Download the latest XP drivers from HP (at this time, for me it's sp30204.exe);
3. Run the .exe (which will fail - note the folder it installs in, again for me it's under C:\swsetup\SP30204)*;
4. Go to Device Manager;
5. Right-click and "update driver software" under "Display adapters";
6. "Browse my computer";
7. Point to the relevant folder;
8. Full 1680x1050 goodness and "Mobility Radeon 9200" correctly identified.

I haven't tried external displays - feel free to give it a go and report back.

Quite why this hasn't been spelled out before I don't know - such a simple task and it took me ages to figure out.  Deliberately cryptic or incomplete answers should mean an internet ban.  For a couple days maybe.

*UPDATE: the latest HP drivers don't seem to like hibernate, sleep or full screen flash (Youtube, 4OD, iPlayer).  I suggest downloading this driver pack from Asus ftp://ftp.asus.com.tw/Pub/asus/nb/A4D/VGA_XP_2K_060102.zip, unzip it to somewhere sensible and go to point 4 above.  It's a newer driver (2006) which seems to have more recent Vista (and 7) compatibility - everything (other than Aero) seems to work.  Enjoy!
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on November 22, 2009, 11:22:45 AM
Hi Mr Cin!
Good to see someone still using this machines (my nx7010 is still running good enough to keep me from buying new notebook!).
Great find - these Asus drivers, but I think they are the same as Omega 5.6 or SP that I mentioned in 3rd post.

Nice work with this walkthrough - it is basically the same as my few lines. But it has been described before for Vista, so I didn't bother to do it again. Sorry if it was misleading in any way.

I would reply before, but someone banned me from internet... ;-)

Have a nice day
Title: Re: Windows 7 on nx7010 (x1000)
Post by: jasonhtt on December 10, 2009, 12:31:31 AM
Does anyone get spontaneous reboot problems? I've installed W7 Ultimate on nx7010 with ATI driver for XP. Everything works great apart from occasional reboot, especially if laptop is left alone for couple of hours. The Event Log states: "The computer has rebooted from a bugcheck. The bugcheck was: 0x0000008e".

I wonder if this could be related to one of the two following things:
1. Video card driver
2. RAM - Originally there were 2x256 MB, but I took one of them out and added 1x1 GB (total: 1x256MB + 1x1GB). However, Microsoft Memory Diagnostics didn't find any problem with RAM.

Anyone with simmilar experience?
Title: Re: Windows 7 on nx7010 (x1000)
Post by: hydroponik on December 11, 2009, 06:20:21 PM
Ok here are my issues with W7 now.

1)  Trying to manually update the drivers using the Asus one from Mr Cin does not work, however I am able to manually update using the (older) compaq drivers.  I now have the native resolution but with the sleep/hibernate issues.  Since then, I have tried further updating to the Asus, but windows is telling me I already have the most up to date.  Is there a way to get this installed?

2)  I also noticed that the old intel chipset drivers do not work in windows 7.  I tried downloading a newer set but that doesn't work either.  Are you guys even installing a chipset driver?

3)  I believe since no chipset drivers were installed, I have a unknown device.  The location is "Intel 82801DBM LPC Interface Controller - 24CC".  Anyone know what this is and how to fix?
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on December 20, 2009, 11:55:46 AM
About question 1) Just follow the steps from Mr. Cin - update manually.
You could also try with HP drivers for nc4000 and install drivers for Radeon mobility 9000 - it is the same card as ours.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=395732&prodNameId=395734&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=PSG_I23133-108006 (http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=395732&prodNameId=395734&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=PSG_I23133-108006)
This is the link for SP31674.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: hydroponik on December 26, 2009, 12:17:29 PM
It seems I can only manually install the 30204 driver set on my X1000 which does not allow the pc to sleep or hibernate. 

If I do not install the 30204 set first, and I try to update to either the asus or the hp drivers, it just says the Standard VGA adapter is up to date.

If I install the 30204 set, then try to manually update to one of the newer drivers, it says the 9200 mobility is up to date.


Not sure what else I can do at this point to get sleep/hibernate working properly.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: bili_39 on January 14, 2010, 04:10:17 AM
So, it is still unclear.

When you select update driver, then manually...

- Select bottom choice (browse my computer..)
- Untick "show only compatible hardware".
- Now you can select Mobility Radeon 9000. It's the same card as 9200.

Title: Re: Windows 7 on nx7010 (x1000)
Post by: hydroponik on February 13, 2010, 10:32:05 AM
Currently I have the 30204 (compaq) driver set installed.

When trying to manually upgrade to the driver set you posted from the HP site, it says "Windows has determined that the driver software for your device is up to date".

If I uninstall the 30204 (compaq) driver set, windows reverts to the Standard VGA Adapter.  If I then try to install your drivers from the HP site, it doesn't detect and just says the VGA adapter is up to date.


I really want to get this working in W7, but if I can't sleep or hibernate, it becomes pretty useless.  Is there anyway I can get either the HP or Asus drivers installed?

For reference, I have the X1000, which may be slightly different from the nx7000.
Title: Re: Windows 7 on nx7010 (x1000)
Post by: GotNoRice on March 26, 2010, 01:00:33 AM
Has anyone been able to get games to work under Windows 7?

There are a number of games that I am still able to play on my X1000 and I do so occasionally when I'm away from home.  World of Warcraft, Counter-Strike: Source, and even Battlefield 2 all work using minimum settings and other older games like Counter-Strike 1.6, Battlefield 1942, Total Annihilation, Day of Defeat, etc run great.

But they only work in XP.  I am able to install Windows 7 and force the older XP drivers to install (tried ancient drivers from HP site as well as 5.6 omegas) and while windows works, no games work at all.